CCS Type 1 Plug J1772 Combo 1 Connector SAE J1772-2009 for DC Fast Charger Point

Type 1 cables (SAE J1772, J Plug) are used to charge EV produced for North America, South Korea and Japan with alternating single-phase current. Due to its slow charging speed, it was replaced by the Combined Charging System (CCS) Combo Type 1 (SAE J1772-2009).

Almost all modern electric vehicles have an improved version, the CCS Combo Type 1, which allows charging from high-power DC circuits also known as rapid of fast chargers.

Contents:
CCS Combo Type 1 Specifications
CCS Type 1 vs Type 2 Comparison
Which Cars Support CSS Combo 1 Charging?
CCS Type 1 to Type 2 Adapter
CCS Type 1 Pin layout
Different Types of Chargings with Type 1 and CCS Type 1

CCS Combo Type 1 Specifications

Connector CCS Type 1 supports AC charging up to 80A. The use of a cable with cooling at the direct charge allows to achieve a charge of 500A if your EV supports it.

AC Charging:

CCS Combo Type 1 DC Charging:

CCS Type 1 vs Type 2 Comparison

The two connectors are very similar on the outside, but once you see them together, the difference becomes obvious. CCS1 (and its predecessor, Type 1) have a completely circular top, while CCS2 has no upper circle segment. The CCS1 is also characterized by the presence of a clamp on the top of the connector, whereas CCS2 has only an opening and the clamp itself is mounted on the car.

The key difference in the technical characteristics of the connectors is that it is not possible to work with three-phase AC power grids via the CCS Type 1 cable.

Which Cars use CSS Combo Type 1 for Charging?

As mentioned earlier, CCS Type 1 is more common in North America and Japan. Therefore, this list of automobile manufacturers establishes them serially in their electric vehicles and PHEVs produced for this region:

• Audi e-Tron;
• BMW (i3, i3s, i8 models);
• Mercedes-Benz (EQ, EQC, EQV, EQA);
• FCA (Fiat, Chrysler, Maserati, Alfa-Romeo, Jeep, Dodge);
• Ford (Mustang Mach-E, Focus Electric, Fusion);
• Kia (Niro EV, Soul EV);
• Hyundai (Ioniq, Kona EV);
• VW (e-Golf, Passat);
• Honda e;
• Mazda MX-30;
• Chevrolet Bolt, Spark EV;
• Jaguar I-Pace;
• Porsche Taycan, Macan EV.

CCS Type 1 to Type 2 Adapter

If you export a car from the United States (or another region where the CCS Type 1 is common), you will have a problem with charging stations. Most of the EU is covered by charging stations with CCS Type 2 connectors.

The owners of such cars have few options for charging:

• Charge EV at home, through the outlet and the factory power unit, which is very slow.
• Rearrange the connector from the European version of EV (for example, the Chevrolet Bolt is ideally fitted with an Opel Ampera socket).
• Use CCS Type 1 to Type 2 Adapter.

Can Tesla use CCS Type 1?

There is no way to charge your Tesla S or X via CCS Combo Type 1 for now. You only can use adapter to Type 1 connector, but the charging speed will be awful.

What adapters should I buy for Type 2 charging?

We strongly discourage the purchase of cheap basement devices, as this could lead to a fire or damage to your electric car. Popular and proven models of adapters:

• DUOSIDA EVSE CCS Combo 1 Adapter CCS 1 to CCS 2;
• Charge U Type 1 to Type 2;

CCS Type 1 Pin layout

1. PE – Protective earth
2. Pilot, CP – post-insertion signaling
3. CS – control status
4. L1 – single-phase AC (or DC Power (+) when using Level 1 Power)
5. N – Neutral (or DC Power (-) when using Level 1 Power)
6. DC Power (-)
7. DC Power (+)