Quality Inspection for Type 2 Portable Ev Charger - 3 Phase 11KW 16Amp IEC 62169 Type 2 EV Charger Modes 2 EV Charging with 5 Pin Red CEE Plug – Mida
Quality Inspection for Type 2 Portable Ev Charger - 3 Phase 11KW 16Amp IEC 62169 Type 2 EV Charger Modes 2 EV Charging with 5 Pin Red CEE Plug – Mida Detail:
Rated Current | 16A Three Phase | 32A Three Phase | ||||
Rated Power | 11KW | 22KW | ||||
Operation Voltage | AC 440 V Max | |||||
Rate Frequency | 50Hz/60Hz | |||||
Leakage Protection | Type B RCD ( Optional ) | |||||
Withstand Voltage | 2000V | |||||
Contact Resistance | 0.5mΩ Max | |||||
Terminal Temperature | <50K | |||||
Shell Material | ABS and PC Flame Retardant Grade UL94 V-0 | |||||
Mechanical Life | No-Load Plug In / Pull Out >10000 Times | |||||
Operating Temperature | -25°C ~ +55°C | |||||
Storage Temperature | -40°C ~ +80°C | |||||
Protection Degree | IP67 ( EV Charging Plug ) , IP67 ( EV Charging Box ) | |||||
EV Control Box Size | 260mm (L) X 102mm (W) X 77mm (H) | |||||
Weight | 3.80KG | |||||
OLED Display | Temperature, Charging Time, Actual Current, Actual Voltage, Actual Power, Capacity Charged, Preset Time | |||||
Standard | IEC 62752 , IEC 61851 | |||||
Certification | TUV,CE Approved | |||||
Protection | 1.Over and under frequency protection 2. Over Current Protection 3.Leakage Current Protection (restart recover) 4. Over Temperature Protection 5.Overload protection (self-checking recover) 6. Ground Protection and Short circuit protection 7.Over voltage and under-voltage protection 8. Lighting Protection |
Product detail pictures:
Related Product Guide:
Our business sticks for the basic principle of "Quality could be the life with the firm, and track record will be the soul of it" for Quality Inspection for Type 2 Portable Ev Charger - 3 Phase 11KW 16Amp IEC 62169 Type 2 EV Charger Modes 2 EV Charging with 5 Pin Red CEE Plug – Mida , The product will supply to all over the world, such as: Denver, Bangladesh, Denver, In order to meet more market demands and long-term development, a 150, 000-square-meter new factory is under construction, which will be put into use in 2014. Then, we shall own a large capacity of producing. Of course, we will continue improving the service system to meet the requirements of customers, bringing health, happiness and beauty to everyone.
By Jean Ascher from Iran - 2018.09.19 18:37
This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
By Cheryl from Slovakia - 2018.10.01 14:14
Leave Your Message:
Write your message here and send it to us